Category: Plumbing

If you see dirty water coming out of the tap do not panic. It could be the simplest of solutions. Sometimes the city flushes their systems, breaking up debris and sending it into your home. Fixing this requires flushing the drains and strainers until the water runs clean again. Most times a plumbers auger will do the trick.

If a municipal flush caused a problem like water pooling in your yard or a wet basement, that could mean your drains need to be flushed to clean out mud and debris. Or it may also mean your drainage system has root intrusion and may need a roto-rooter machine to cut out the roots.

In extreme cases you may have to replace the perimeter drains or even have the pipes leading to the sewer system replaced.

Here’s What A Plumber Does For a Plugged Drain

In Case of a Flood

If water is flooding your home, immediately switch off the main electrical power. If water comes into contact with any electrical components, it can become a fatal situation. Once the power is off, then deal with the flood water. Put your own and your family’s personal safety first, and show each member of the family how to shut off the power.

To help you find a good plumber, you should get recommendations from people whom you trust, or read more about good plumbing tips. Asking a friend or a neighbor is usually more trustworthy than picking a random plumber out of the phone book. You need a competent plumber, otherwise you could be in for a much bigger problem down the road.

The Main Water Shut off Valve

Make sure you know where your home’s water shutoff is located. You never know when there might be an emergency involving a broken pipe or damaged connection that requires you to turn off the water right away. In addition, knowing where the shutoff is located is vital before you start any plumbing project, in case anything goes wrong.

For a clogged drain try using a plunger first, as your clog may simply be a build-up of hair and debris. If this doesn’t work you may have to clear the drain with a snake. Feed the snake into the drain line as far as it will go. Turn the crank gently which will either collect the blockage or loosen the clog. Remove the snake, and run water down the drain to see if the clog has been removed. You may have to use the snake a couple of times, before the clog is cleared so don’t give up!

How to Retrieve a Lost Ring

If you drop a small item like a ring or earring into a sink drain, hope is not lost. By carefully removing the U-shaped trap underneath the sink, you can probably retrieve the item. Be aware that the trap will be full of water, though, so have something under it to catch the spills.

If all else fails click here and call this local Vancouver plumbing company they will dispatch a technician right away if it’s an emergency. If it can wait we usually book an appointment that’s convenient for both.

Sometimes the city flushes their systems, breaking up debris and sending it into your home. If this municipal flush caused a problem like a drop in water pressure though, that could mean your drains need to be flushed to clean out mud and debris. In extreme cases you may have to replace the perimeter drains or even have the pipes leading to the sewer system replaced.


emergency plumber

Many people do not consider the value of a quality plumbing system expert, until the basement floods or one of the pipes burst. When a overnight plumbing emergency occurs, not just any type of plumbing contractor is a good choice. When you’re wanting to hire someone on short notice, there are a few questions you should ask. You will want to know is whether he has a certificate and proper insurance. It is also important that they carry workers compensation in case someone gets hurt on the job. You don’t want to be held liable for injuries of this nature, especially when the best course of action is to sue.


As soon as you have confirmed that the company is appropriately qualified, learn just how long they have been in business. Fly by night companies are usually start up’s and will not have any references. Another way to do a quick search on a companies integrity is to look for online reviews. A good company will have at least 50% or more of their reviews positive. Any less than that and you might want to look further. Don’t get turned off by one of two bad reviews among lots of good ones, sometimes competitors will post negative comments to hurt the other guys.

Some plumbing companies do not have a lot of reviews, but it doesn’t mean they are no good. For example the vancouver plumbing company Pioneer Plumbing is a great resource if you want a quality plumber to do the work for you. If price is more of a concern then you should call around for quotes and find a handyman you are comfortable dealing with. If you have a plumbing issues you want fixed right then use a licensed plumbing contractor who specializes in solving these type of problems.


Ask about the prices and the quality of parts they use. Another good question is about any kind of assurance they offer. A reputable plumber will freely offer all their connections and associations. A shady guy will hum and haw trying to beat around the bush.

If you are somewhat handy you should be able to stop the water fro flooding your basement if you know where the main shut off valve is. If you are reading this for the information, take a few minutes and get familiar with where that is. Another thing you can do is walk around and do a simple inspection of the visible plumbing in your home. Here are a few tips for taking care of the simplest stuff. Catching something before it becomes a major problem is well worth an hour or two of your time each year.

If you ever have the lousy experience of a sewer overflow remember how to look for a reputable plumber, if you don’t already know one.


Installing a new toilet will revitalize an old-looking bathroom. This process is not that difficult, though it does take care and the ability to precisely follow instructions. A poorly-installed toilet may cause the toilet to function improperly, causing damage to the bathroom and – possibly – the entire house.

Removing Existing Toilet

Before beginning the removal of the toilet, turn the water supply off by means of the shut-off valve behind the toilet. Once the water has been turned off, flush the toilet. Some water will remain in the toilet and this should be removed by forcing it down using a plunger. Soaking up the remaining water with a sponge will minimize the amount of water that will get on your floor when the toilet is removed.

At this point, the water line at the back of the toilet can be removed with a wrench.

Removing the bolts on the bottom of the toilet is next. They may have plastic covers over them, but they can be pulled off using only your fingers.

Now remove the bolts that connect the water tank to the toilet bowl. Placing your hands on either side of the bottom of the tank, carefully lift it from the toilet by gently rocking it from side to side. There will be a little water still in the tank, so sit it on a garbage bag on the floor.

The toilet can now be removed and disposed of.

Installing the New Toilet

  • First, plugging the drain hole with a rag will prevent smelly gases from rising into the bathroom. It might also prevent tools from disappearing! Just remember to remove the rag before installing a new toilet.
  • Pull the old bolts out of the flange.
  • Use a putty knife to scrape off the wax seal. Wipe it clean when you’re done.
  • At this point is a good idea to inspect the round metal or plastic flange that was under the wax. If it looks damaged, replace it.
  • Now put the new bolts in the flange. They go in special channels, sort of like the keyhole slots on the back of picture frames for hanging the picture on a nail.
  • Put the new was seal in place, with the plastic or rubber facing out. Push down hard and twist it to get it really stuck in place.
  • Now is the time to remove the rag you put in the hole at Step 1.
  • Set the new toilet in place over the anchor bolts. If the toilet came pre-assembled with a new tank, removing the tank (which is easy) will make it a lot easier to handle the toilet. Press on the toilet bowl and rock it to help seal it to the wax ring.
  • Reinstall the washers and nuts on the bolts at the base of the toilet, followed by the plastic caps. Be careful not to over-tighten the nuts, as this could crack your new toilet.
  • Next, place the water tank on its side and insert tank bolts and washers from the inside and put a new gasket around the hole where it will attach to the toilet.
  • Place the tank on the toilet, fitting nuts onto the bolts and tightening them gently.
  • If your tank does not have the toilet valve assembly pre-installed, do that now. Dry test your flapper valve to see if seems to seal properly.
  • Reconnect the water supply line, turn the water on and allow the tank to fill. Flush the toilet several times while watching to see if any water appears at the floor, around the base of the toilet, or between the toilet bowl and tank.
  • Once you are sure there are no leaks, apply some caulking around the base of the toilet where it meets the floor. And there you have it.

If you feel this job is too big to handle you are not alone. Many people will hire a local plumber to take care of a new toilet installation or plumbing repair. It’s messy and requires tools you may not have.